Thread has no images

Model X PP Force Testing sytems, Đo Lực Căng, Lực Kéo

Nơi bán
Hồ Chí Minh
Tình trạng
Đã bán
Địa phương: Hồ Chí Minh
Tình trạng: Đã bán
Giá: 999.000
Điện thoại di động:
  • (Do Nguyen)
Địa chỉ: 602/41E, Dien Bien Phu, P.22, Q.Binh Thanh, Tp.HCM, Quận Bình Thạnh, Hồ Chí Minh (Bản đồ)
Thông tin: Đã gửi 26/4/18, 117 Xem, 0 Trả lời
  1. MrNguyenTMPVietnam

    MrNguyenTMPVietnam Thành viên

    22/3/18
    30
    0
    Điểm:
    $0
    #1 MrNguyenTMPVietnam, 26/4/18

    Thông tin sản phẩm

    Nơi bán
    Hồ Chí Minh
    Tình trạng
    Đã bán
    MODEL X-PP FORCE TESTING SYSTEMS
    https://sites.google.com/site/tmp08vietnam/_/rsrc/XXX/home/cover%20TMP.png


    http://tmplaboratory.com/model-xpp-force-testing-systems-thiet-bi-do-luc-keo-dillon-viet-nam
    https://sites.google.com/site/tmp08vietnam/dillon/model-x-pp-force-testing-systems/XPP.jpg?attredirects=0



    Force gauges calibrated in push-pull are available in four capacities in pounds ranging from 50-0-50 lb up to and including 2,500-0-2,500 lb and three metric capacities from 50-0-50 to 1,000-0-1,000 kg. Accuracy is ±2% of maximum dial reading (based upon total capacity of both compression and tension scales).



    Model X-PP gauges in capacities up to and including 500-0-500 lb or 250-0-250 kg are supplied with a set of self-aligning spherical rod-end connectors for tension loading. Force is applied to connectors through a hardened steel pin which must be slip fit in connector holes.



    2,500-0-2,500 lb and 1,000-0-1,000 kg capacity gauges are equipped with two shackle adapters, shackles and pins. Shackles must be removed when compression load is involved. Force is then applied against shackle pins in a suitable test setup.



    All push-pull gauges are supplied with a compression-loading spherical ball fitting for compression loading.



    Options:



    • Shockless dial indicator for installations involving the sudden application or release of force. (Maximum pointer cannot be supplied with shockless dial indicator)
    • Zero position on dial may be factory positioned at 12, 3, 6, or 9 oclock. Standard position is at 12 oclock.


    Và rất nhiều hãng khác: AT2E, As scholer, Ametek PI, Ametek test, Bircher, Barksdale, Beckhoff, Busmann, Baumuller, Baumer, Elau, Elettrotek Kabel, IBA, Kern Sohn, Keller, Kiepe, Mark 10, Matsushima, Matsui, Masibus, Maxonic, Mehrer, Nireco, Pilz, Pora, Pentair, Redlion, Rotork, Soldo, Teclock, TDK Lambda, Telco Sensors, Yokogawa, Wise, Wago, Wittenstein, Asa – RT, Aviteq, Bihl wiedemann, Brevini, Conatec, Gemu, Kyowa, Mdexx, Megatron, Meinsberg, Microsonic, Meinsberg, Microsonic, MKS Anlasser, Novotechnik, PMA, PS electric, Schiebel, Singerland Bremsen, Spohn Burkhardt, Sytstec, STI Vibration Monitoring, Tematec, Van Der Graaf, Vaccum Barrier, DedaWeld, Orion Instrument, PCI-Instrument, PCE-Instrument, Dillon, Fotoelektrik Pauly, Keofitt, IPF, BarkDale,...
     

    Về người bán

    MrNguyenTMPVietnam
    Ngày tham gia:
    22/3/18
    Sản phẩm:
    30
    Thích đã nhận:
    0
Đang tải...