https://scontent-hkg3-1.xx.fbcdn.net/v/t1.0-9/13094365_XXX_XXX_n.jpg?oh=8f56153910f944ae4f79a74e7832a031&oe=57B323E1
The newly developed K Series drill is designed and optimised for High Speed Spindles.
Model Number Characteristic Appearance Size
KMD Drill bits for High Speed Spindle Straight Type ø0.075〜ø0.25
KMV Drill bits for High Speed Spindle Under Cut Type ø0.075〜ø0.25
KMC Drill bits for High Speed Spindle Under Cut Type ø0.075〜ø0.25
KUC Drill bits for High Speed Spindle Under Cut Type ø0.3〜ø2.0
KID Inverse Drill for High Speed Spindle Straight Type ø2.05〜ø4.05
MD ( Micro Drill ) Series (438KB)
Model Number Characteristic Appearance Size
MD Improved hole registration accuracy and inner hole wall quality Straight Type ø0.05〜ø0.25
MC Improved hole registration accuracy and inner hole wall quality Under Cut Type ø0.15〜ø0.25
MV Improved hole registration accuracy and inner hole wall quality Straight Type ø0.15〜ø0.25
MCV Improved hole registration accuracy and inner hole wall quality Under Cut Type ø0.2〜ø0.25
UC/UV ( Small Diameter ) Series (438KB)
Model Number Characteristic Appearance Size
UC Standard Drill Under Cut Type ø0.3〜ø0.55
UV Offers a good balance between hole registration accuracy and inner hole wall quality Under Cut Type ø0.3〜ø0.75
UC35/UM35/UA Series (478KB)
Model Number Characteristic Appearance Size
UC35 Improved hole registration accuracy and inner hole wall quality Under Cut Type ø0.8〜ø1.6
UM35 Drill for Multi-Layer Board Under Cut Type ø0.6〜ø1.6
UA Improve inner hole wall quality Under Cut Type ø0.8〜ø1.6
UM30 Series /ST Series (510KB)
Model Number Characteristic Appearance Size
UM30 Drill for Multi-Layer Bases Under Cut Type ø1.65〜ø3.175
ST Standard Drill Straight Type ø0.3〜ø3.175
ID30C ( Inverse Drill ) Series (472KB)
Model Number Characteristic Appearance Size
ID30C Chip Breaker/Thinning Inverse Drill Straight Type ø3.2〜ø6.5
http://www.uniontool.co.jp/english/catalogue/drill/sx24.pdf
Model Number Characteristic Appearance Size
SX24 For Slot Drilling Under Cut Type ø0.5〜ø1.6
RCM/RHM Series （Standard Diamond Router） (470KB)
Model Number Characteristic Size
RCM For General Contour Routing ø0.6〜ø3.175
RHM Improved Burr Reduction ø0.8〜ø3.175
SC Series （Chip-Breaker Flute Router） (225KB)
Model Number Characteristic Size
SC Improved Burr Reduction ø0.6〜ø3.175
SCM-FT Series （Chip-Breaker Flute Router） (454KB)
Model Number Characteristic Size
SCM For General Contour Routing ø0.8〜ø1.8
RS Series （Down Draft 2-Flutes Slitting Router） (444KB)
Model Number Characteristic Size
RS Down Draft Slitting Cutter ø0.4〜ø3.175
RP Series （Up Draft 2-Flutes Slitting Router） (444KB)
Model Number Characteristic Size
RP Up Draft Slitting Cutter ø0.4〜ø3.175
SF Series （DP Type Single-Flute Router ） (441KB)
Model Number Characteristic Size
SF For Soft Material Bases ø0.8〜ø3.175
SM Series （Semilunar-Type Cutter ） (437KB)
Model Number Characteristic Size
SM For Spot Facing Work ø1.0〜ø3.0
SI Series （Straight 2-Flute Type） (454KB)
Model Number Characteristic Size
SI For Long-Life Spot Facing Work ø1.0〜ø3.0
IC Series （Taper 2-Flute Type) (435KB)
Model Number Characteristic Size
IC For Taper Spot Facing Work ø1.0〜ø3.0
RV Series （V-Groove Cutter） (431KB)
Model Number Characteristic Size
RV For V-Groove Work ø1.0〜ø3.175
RA Series （For Nonferrous Metals） (437KB)
Model Number Characteristic Size
RA For Nonferrous Metals ø0.8〜ø3.0
RI Series （Noiched Straight 3-Flute Type ) (436KB)
Model Number Characteristic Size
RI For Contour Finishing ø0.8〜ø3.175

CÔNG TY TNHH KỸ THUẬT KTECH VIỆT NAM

* VPGD : Phòng 307 Nhà A- Khu đô thị Mới Xuân Đỉnh -Phố Đỗ Nhuận-Quận Bắc Từ Liêm-T.P Hà Nội

* Mobile: XXX * Email : sales2@ktechvn.com.vn

* Website : http://www.ktechvn.com.vn hoặc http://www.ktech.vn hoặc ktechion.com